Sopro Bauchemie GmbH

Surface fillers

Fliesentechnik, Baustoffe und GaLaBau - Sopro Bauchemie GmbH bietet ein komplettes Sortiment im Bereich Fliesen- und Baustofftechnik.
Sopro AFS 561

Sopro AFS 561

Anhydrite floor-levelling compound

White, pumpable, flow-applied, self-levelling, rapid-set, alpha-hemihydrate-based filler used to level out gypsum-based/calcium sulphate-based (anhydrite and self-levelling anhydrite)


Sopro AMT 468

Sopro AMT 468

Levelling mortar with trass

Universal, light-grey, sag-resistant, rapid-set, cementítious surface filler applied to walls and floors for patching and smoothing concrete, plasterwork, masonry and screed surfaces.


Sopro DFS ambiento<sup>®</sup>

Sopro DFS ambiento®

Self-levelling designer floor topping

965

Decorative, self-levelling, rapid-set, cementitious designer floor topping for production of finished floor surfaces.


Sopro FAS 551

Sopro FAS 551

Fibre-reinforced self-levelling filler

Flexible, flow-applied, self-levelling, rapid-set, cementitious, fibre-reinforced surface filler used to even out irregularities in timber and mineral substrates, especially on refurbishment/renovation contracts.


Sopro FS 15<sup>&reg;</sup>  plus

Sopro FS 15® plus

Floor-levelling compound

Pumpable, self-levelling, rapid-set, cementitious universal surface filler with excellent flow properties. Applied in thin coats upwards of 2 mm to level mineral substrates and produce smooth, plane, unbroken subfloor surfaces.


Sopro FS 5<sup>&reg;</sup>

Sopro FS 5®

Floor-levelling compound

Cementitious, self-levelling, rapid-set, pourable filler compound for thin-coat application to produce particularly smooth surfaces and as skim coat to fill pores, hairline cracks etc.


Sopro GH 564

Sopro GH 564

Casting resin

High-fluidity, rapid-set, two-component acrylic resin system for structural bonding of cracks in screeds. Extended with silica sand, used for filling joints and defective areas and for levelling out irregularities.


Sopro NSC 587

Sopro NSC 587

Floor-levelling compound

Pumpable, flow-applied, self-levelling, rapid-set, cementitious surface filler.


Sopro OFS 543

Sopro OFS 543

Contract floor-levelling compound

Self-levelling, pumpable, rapid-set, cementitious surface filler to produce smooth, level, unbroken surfaces for subsequent laying of all kinds of flooring. Suitable for floor heating systems.


Sopro RAM 3<sup>&reg;</sup>

Sopro RAM 3®

renovation and levelling mortar

Universal, grey, sag-resistant, rapid-set, cementitious render and surface filler for smoothing, patching and rendering of wall and floor surfaces. For application to mineral substrates, e. g. concrete, aerated concrete and masonry.


Sopro RAP 2

Sopro RAP 2

Renovation and levelling render

434

Sag-resistant, rapid-set, cementitious render and surface filler for smoothing, patching and rendering of wall and ceiling surfaces. 


Sopro Rapidur<sup>&reg;</sup> FE 678

Sopro Rapidur® FE 678

Self-levelling screed

Polymer-modified, ready-to-use dry mix for production of rapid-set screeds screeds allowing early flooring installation. 


Sopro RDS 960

Sopro RDS 960

Perimeter insulation strip

Self-adhesive perimeter insulation strip made from rotproof, nonwoven-backed polyethylene foam. Straightforward, reliable application.


Sopro RS 462

Sopro RS 462

Repair filler

Grey, sag-resistant, rapid-set, cementitious surface filler for smoothing, patching, levelling and repairing concrete, plasterwork, masonry and screed surfaces.


Sopro SBP 474

Sopro SBP 474

swimming pool render

Grey, sag-resistant, rapid-set, fibre-reinforced render and filler to DIN EN 998-1, Table 1, strength class CS IV, for rendering, patching and smoothing of wall, floor and ceiling surfaces in concrete, aerated concrete, pumice, clay, calcium-silicate and composite masonry.


Sopro SLC 578

Sopro SLC 578

Self-levelling compound, 3 – 40 mm

578

Rapid-set, self-levelling, cementitious filler for production of smooth, unbroken surfaces prior to flooring installation. Low-chromate to Regulation (EC) No 1907/2006, Annex XVII.


Sopro SP 466

Sopro SP 466

Lightweight levelling mortar

Grey, sag-resistant, rapid-set, cementitious, polymer-modified universal surface filler incorporating lightweight aggregate. Used as rapid-set filler for patching and smoothing concrete, masonry and plastered/rendered wall surfaces.


Sopro SP 770

Sopro SP 770

Rapid-set filler

Grey, high-strength, sag-resistant, rapid-set, cementitious surface filler. Universal use for filling and patching deep irregularities, holes and cracks in concrete and screeds.


Sopro SSP

Sopro SSP

Grinding filler for industrial application

465

Rapid-set, industrial surface filler for fast, efficient coating of natural and cast stone units. Particularly suitable for finishing stone units on grinding lines.


Sopro USW 941

Sopro USW 941

White universal filler

White, sag-resistant, rapid-set, cementitious filler for universal application to fill, patch, smooth, mould and model indoor and outdoor surfaces. Ideal for renovation and refurbishment contracts.


SoproDur<sup>&reg;</sup>

SoproDur®

Microcement void filler

One-component, mineral microcement with special additives. For remedial filling of hollows and voids below tiling, fully vitrified stoneware, natural stone and vibrated floors.