Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds.
High-alkali-resistant synthetic dispersion mixed with quartz sand for pretreatment of indoor mineral substrates, especially concrete, which are unsuitable for direct application of gypsum plasters due to their low suction, smoothness and density.
Hydraulically setting, mineral paint for new-build, refurbishment and architectural conservation schemes. Resistant to water, weather and freeze-thaw cycles
Used in conjunction with Sopro BH 869 construction resin, Sopro EEK 871 epoxy screed aggregate, continuously graded in 0.063 – 4.0 mm range, produces a rapid-set synthetic resin screed achieving grade SR-C25-F7 to DIN EN 13813 to allow early flooring installation.
Solvent-free, unpigmented, two-component liquid epoxy resin. Applied as primer to stabilize friable mineral substrates and as adhesion promoter on smooth substrates, e.g. metal, mastic asphalt and existing coatings.
Solvent-free, bicomponent epoxy resin barrier coat for substrate preparation, particularly suitable for application to freshly laid and/or damp screeds.
Light-blue, solvent-free, fast-drying, synthetic resin primer for highor variable-suction substrates. For pretreatment of cement screeds, calcium sulphate-based screeds, board subfloors, gypsum plasterboard and gypsum fibreboard
Polymer dispersion used as bonding layer for mineral surface fillers and plasters/renders (e. g. Sopro FS 15 plus and Sopro FS 30 maxi floor-levelling compounds). For wet-on-wet application.
Dark-grey, solvent-free polymer dispersion applied in thin coat as bonding layer to impervious, smooth and non-absorbent substrates prior to tilelaying.
Trass-bearing bonding and contact slurry for conventional tilelaying using thick-bed method.
One-component, trass-bearing, high polymer-modified bonding and contact slurry for laying of natural or cast stone coverings and paving units.
Used in preparing Sopro FEP three-component epoxy tile grout
Special, transparent-white, solvent-free, polymer dispersion-based deep-penetrating primer for stabilizing friable substrates, e. g. cement, lime or lime/cement renders and gypsum plasters. Substantially
Extra-low-emission, quick-drying, one-component reaction resin primer. Particularly suitable for calcium sulphate-based (anhydrite) screeds when laying large-format
Used in preparing surface fillers and for blinding epoxy resin coatings.
Used in preparing surface fillers and for blinding epoxy resin coatings
One-component, trass-bearing, highly polymer-modified bonding and contact slurry. Applied as flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods.