Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds.
Trass cement-bonded bedding mortar for laying natural stones, pavers, flags and tiles in outdoor areas.
Rapid-set, special cement-bound, premixed dry mortar with special single- sized grading and rapid strength development for indoor and outdoor laying of tiles and natural stone units, particularly on balconies and patios.
Drainage mat made of polyethylene and non-woven fabric. Use in conjunction with Sopro DRM 610 drainage mortar ensures reliable horizontal drainage of balconies, patios and staircases underneath ceramic and natural stone tile finishes.
Solvent-free, pigmented, ready-mixed, rapid-set, two-component, epoxy-based reaction resin mortar. Exceptionally high abrasion resistance, compressive, tensile bending and pull-off strength.
Used in conjunction with Sopro BH 869 construction resin, Sopro EEK 871 epoxy screed aggregate, continuously graded in 0.063 – 4.0 mm range, produces a rapid-set synthetic resin screed achieving grade SR-C25-F7 to DIN EN 13813 to allow early flooring installation.
Special polymer-modified binder for production of high-strength, rapid-set cement screeds based on DIN 18560 allowing early flooring installation.
Special polymer-modified binder for particularly economical production of high-strength, rapid-set cement screeds based on DIN 18560 allowing early flooring installation.
Polymer-modified, ready-to-use dry mix for production of rapid-set screeds screeds allowing early flooring installation.
Polymer-modified, ready-to-use dry mix, CT-C 50-F7 to DIN EN 13813, for production of rapid-set cement screeds allowing early flooring installation.
Polymer-modified, ready-to-use dry mix, CT-C 35-F6 to DIN EN 13813, for particularly economical production of rapid-set cement screeds allowing early flooring installation.
Two-component, flow-applied polyester resin for structural bonding of cracks in screeds and for production of reaction resin mortars for minor repairs.
Special trass-bearing, cementitious binder for preparation of thick-bed adhesives, wall tile adhesives and drainage mortars.
Hydraulically setting, trass-bearing, cementitious mortar for laying and bonding of discoloration-sensitive natural stone units (e. g. Solnhofen stone tiles, Jura marble), cast stone units and window sills
Two-component epoxy resin coating for protection of cementitious substrates, such as screeds and concrete surfaces, and finished floor surfaces produced with SoproDur® HF-S 563 floor-levelling compound, against mechanical and chemical loads.